Dealer Login
User Name:   Password:  
Installation Diagram
  1. BUILD WOODEN FRAME AS PER DIMENSIONS PROVIDED ABOVE
  2. APPLY x RETAINING STRIP AROUND THE MIDDLE OF ALL FRAME OPENINGS, USING 1 LONG GALVANIZED NAILS
  3. INSERT (2) TOPPERS INTO PLACE, MAKING SURE THEY TOUCHIN THE MIDDLE
  4. USING A SCREW DRIVER, OR A POWER DRILL, APPLY #8-3/4 LONG WOOD SCREWS (STAINLESS) TO ALL HOLES, SECURING TOPPER PLATES TO WOODEN FRAME. (52) SCREWS ARE REQUIRED TO INSTALL ONE 8 FT SECTION, CONSISTING OF (2) BOTTOM SECTIONS AND (2) TOPPERS.
  5. APPLY x 3/4 WOODEN TRIM, USING GALVANIZED NAILS, COVERING SCREWS
  6. REPEAT STEPS #3 TO #5 FOR BOTTOM PLATES.

NOTE - It is important to apply screws to all the holes to prevent entire section from sagging over time.


DISCLAIMER
  • Do not place fingers and / or hands through fence. It may result in personal injury
  • New Trend Fencing Inc. is not responsible for injuries caused by improper installation

WARRANTY

A five year warranty against surface rust is granted providing:


  • Powder-coated finish is not chipped, scratched, or damaged in any other way
  • Panels are not installed near a road, exposed to salt and/or stone damage
  • Panels are properly installed as per instructions provided